Easter Bunny Crochet Pattern

This Easter bunny crochet pattern creates a soft, rounded amigurumi bunny with long tapered ears, a sweet embroidered face, and a simple plush silhouette. The bunny is made from separate crocheted pieces that are stuffed and sewn together, giving you a clear path from the first round to the finished project.

The design uses soft cream as the main color with blush-pink accents. The target finished size is approximately 8–9 inches (20–23 cm) including the ears, although the final size will vary with yarn, hook size, tension, stuffing, and individual crochet technique.

Project Overview

This crochet Easter bunny features a rounded head and body, long tapered ears, short arms, compact legs, and a small rounded tail.

The main body pieces are worked in continuous rounds, while the ears are worked flat in rows. After the individual pieces are finished, they are stuffed as needed and sewn together.

Project Details

Project: Plush Easter bunny
Approximate target size: 8–9 inches including ears
Yarn: Medium/worsted-weight #4 yarn
Main color: Soft cream
Accent color: Blush pink
Hook: 3.5 mm crochet hook
Eyes: 10 mm safety eyes
Stuffing: Polyester fiberfill
Construction: Separate crocheted pieces with sewn assembly
Gauge: Not required

The finished size is approximate rather than a guaranteed measurement.

Pattern Status

This pattern has been mathematically reviewed and constructionally checked, but it has not been physically crocheted and tested yet.

Materials & Tools

You will need:

Medium/worsted-weight #4 yarn in soft cream
A small amount of blush-pink yarn
A small amount of dark brown or black embroidery thread
3.5 mm crochet hook
10 mm safety eyes
Polyester fiberfill
Tapestry needle
Stitch marker
Scissors

The pattern does not specify a yarn brand or exact yarn quantity.

Safety Note

Safety eyes can present a choking hazard and are not appropriate for children under 3. This project should not be described as baby-safe or child-safe.

Crochet Abbreviations

This pattern uses standard US crochet terminology.

Abbreviation	Meaning
MR	Magic ring
ch	Chain
sc	Single crochet
inc	Increase — 2 sc in the same stitch
dec	Single crochet 2 together (sc2tog)
FO	Fasten off

Before You Start

The head, body, arms, legs, and tail are worked in continuous rounds unless otherwise stated. Use a stitch marker to keep track of the beginning of each round.

The ears are worked flat in rows, so you will turn at the end of each row.

Keep track of the stitch count at the end of every round or row. The stitch counts are included throughout the pattern so you can catch mistakes before they affect later shaping.

The bunny is assembled after the individual pieces are complete. For paired pieces such as the ears, arms, and legs, compare both sides before sewing them permanently into place.

Working in Continuous Rounds

Unless a section specifically says Row, do not join at the end of each round. Move directly into the next round and use a stitch marker to identify the starting point.

Counting Your Stitches

Check your stitch count whenever a round includes increases or decreases. Keeping the correct count is especially important during the shaping sections.

Stuffing

Add stuffing gradually rather than packing each piece all at once.

The head should be firm and smooth, the body moderately stuffed, and the arms and tail lightly stuffed. The legs can be stuffed more firmly so they hold their rounded shape.

Avoid overstuffing because excessive filling can stretch the stitches and distort the finished shape.

Head — Make 1

Use the main cream color.

Round 1: 6 sc in MR (6)
Round 2: 6 inc (12)
Round 3: (sc, inc) × 6 (18)
Round 4: (2 sc, inc) × 6 (24)
Round 5: (3 sc, inc) × 6 (30)
Round 6: (4 sc, inc) × 6 (36)
Round 7: 36 sc (36)
Round 8: 36 sc (36)
Round 9: 36 sc (36)
Round 10: 36 sc (36)
Round 11: 36 sc (36)
Round 12: (4 sc, dec) × 6 (30)
Round 13: (3 sc, dec) × 6 (24)
Round 14: (2 sc, dec) × 6 (18)
Round 15: (sc, dec) × 6 (12)

Stuff the head firmly while keeping the surface smooth.

Fasten off, leaving a long sewing tail. Keep the 12-stitch opening available for joining the head to the body.

Add the Face

Insert the two 10 mm safety eyes symmetrically on the front of the head around the Round 9–10 area.

Before securing them completely, look at the face from the front and compare both sides so the eyes sit at a similar height.

Embroider a small nose below the eyes using dark brown or black thread, then add a short mouth line below the nose.

A small blush-pink accent can also be embroidered beside the muzzle area.

Body — Make 1

Use the main cream color.

Round 1: 6 sc in MR (6)
Round 2: 6 inc (12)
Round 3: (sc, inc) × 6 (18)
Round 4: (2 sc, inc) × 6 (24)
Round 5: (3 sc, inc) × 6 (30)
Round 6: (4 sc, inc) × 6 (36)
Round 7: (5 sc, inc) × 6 (42)
Round 8: 42 sc (42)
Round 9: 42 sc (42)
Round 10: 42 sc (42)
Round 11: 42 sc (42)
Round 12: 42 sc (42)
Round 13: (5 sc, dec) × 6 (36)
Round 14: (4 sc, dec) × 6 (30)
Round 15: (3 sc, dec) × 6 (24)
Round 16: (2 sc, dec) × 6 (18)
Round 17: (sc, dec) × 6 (12)

Stuff the body moderately firmly.

Fasten off, leaving a long sewing tail. Keep the 12-stitch opening open for attaching the head.

Ears — Make 2

Use the main cream color.

Chain 9.

Row 1: sc in 2nd ch from hook and across (8)

Turn after each row. Chain 1 at the beginning of each new row; the turning chain does not count as a stitch.

Row 2: inc, 6 sc, inc (10)
Row 3: 10 sc (10)
Row 4: 10 sc (10)
Row 5: dec, 6 sc, dec (8)
Row 6: 8 sc (8)
Row 7: 8 sc (8)
Row 8: 8 sc (8)
Row 9: 8 sc (8)
Row 10: 8 sc (8)
Row 11: dec, 4 sc, dec (6)
Row 12: 6 sc (6)
Row 13: 6 sc (6)
Row 14: dec, 2 sc, dec (4)
Row 15: 2 dec (2)

Fasten off, leaving a long sewing tail.

For an optional inner-ear accent, embroider a narrow blush-pink line along the center of each ear.

Arms — Make 2

Use the main cream color.

Round 1: 6 sc in MR (6)
Round 2: 6 inc (12)
Round 3: 12 sc (12)
Round 4: 12 sc (12)
Round 5: 12 sc (12)
Round 6: 12 sc (12)
Round 7: 12 sc (12)
Round 8: (sc, dec) × 4 (8)
Round 9: 8 sc (8)
Round 10: 8 sc (8)
Round 11: 8 sc (8)

Add a light amount of stuffing.

Fasten off, leaving a long sewing tail. Flatten the 8-stitch opening and sew it closed.

Legs — Make 2

Use the main cream color.

Round 1: 6 sc in MR (6)
Round 2: 6 inc (12)
Round 3: (sc, inc) × 6 (18)
Round 4: 18 sc (18)
Round 5: (sc, dec) × 6 (12)
Round 6: 12 sc (12)
Round 7: 12 sc (12)
Round 8: 12 sc (12)
Round 9: 12 sc (12)
Round 10: 12 sc (12)
Round 11: 6 dec (6)

Stuff the lower portion firmly enough to hold its rounded shape.

Fasten off, leaving a long sewing tail. Close the remaining 6-stitch opening by weaving through the front loops and pulling gently.

Tail — Make 1

Use the main cream color.

Round 1: 6 sc in MR (6)
Round 2: 6 inc (12)
Round 3: 12 sc (12)
Round 4: (sc, dec) × 4 (8)
Round 5: 4 dec (4)

Add a small amount of stuffing before closing.

Fasten off and cinch the 4-stitch opening closed.

Assemble the Easter Bunny

Assembly is easiest when all the finished pieces are laid out before you begin sewing.

Step 1: Attach the Head

Place the 12-stitch opening of the head against the matching 12-stitch opening of the body.

Align the openings as evenly as possible and sew them together using the head’s long sewing tail.

Check the bunny from the front and side before fully securing the seam.

Step 2: Attach the Ears

Position the ears on the upper sides of the head.

Use the wider edge of each ear as the sewing edge and place the ears symmetrically.

Before finishing the stitches, check both ears from the front, back, and sides. They should lean naturally without twisting.

Step 3: Attach the Arms

Sew one arm to each side of the body around the middle-to-upper section.

Keep both arms at the same height and allow them to hang naturally rather than pulling them tightly against the body.

Step 4: Attach the Legs

Position the legs toward the lower sides of the body, slightly forward of the centerline.

Place the second leg as a mirror image of the first. Compare both sides before permanently sewing them in place.

Step 5: Attach the Tail

Sew the tail to the center-back area of the lower body.

The tail should sit securely without pulling the body out of shape.

Finishing Your Bunny

Once every piece is attached, weave in the remaining yarn ends and trim the excess.

Give the bunny a final shaping check. Look at the ears, arms, legs, and tail from several angles to make sure the silhouette is balanced.

Check the face once more and make any small embroidery adjustments before considering the project complete.

Helpful Tips

Keep Your Tension Consistent

Changes in tension can affect the shape and final size of amigurumi pieces. Try to maintain an even tension throughout each component.

Check Stitch Counts Early

If your stitch count is incorrect, stop and recount before continuing. A missed increase or decrease can affect the shaping in later rounds.

Compare Paired Pieces

Place both ears, arms, or legs side by side before attaching them. This makes asymmetries much easier to spot.

Stuff Gradually

Add stuffing in small amounts and shape the piece as you work. This helps prevent lumps and excessive stretching between stitches.

Troubleshooting

My Stitch Count Is Off

Stop at the end of the round and recount before continuing. A missed increase or decrease early in the piece can change the shape several rounds later.

My Stitches Look Too Loose

Try maintaining more consistent tension. Individual tension can affect the fabric and final size of the finished bunny.

The Stuffing Is Showing

Add stuffing gradually and check the fabric as you work. Avoid packing the piece excessively, especially around the head.

My Ears Look Uneven

Lay both ears side by side before attaching them. Compare their base, length, and orientation before sewing either one permanently.

The Head Looks Tilted

Before completing the neck seam, check the face from the front and side. Adjust the orientation of the head before tightening the final stitches.

The Bunny Looks Uneven After Assembly

Place the finished bunny on a flat surface and compare both sides. Small positioning differences can often be corrected by adjusting the attachment angle before the sewing ends are fully secured.

Customize Your Bunny

The basic design can be personalized through small color and embroidery changes without changing the core construction.

Change the Main Color

Try the bunny in another soft neutral, pastel, or seasonal color.

Change the Facial Expression

A slightly different embroidered mouth or cheek detail can give the same bunny a different personality.

Add Inner-Ear Color

Use blush pink for a classic contrast, or replace it with another accent shade that complements your main yarn color.

Create Character Variations

Small color changes can give the bunny its own visual identity while keeping the main construction unchanged.

Frequently Asked Questions

How big is the finished Easter bunny?

The design target is approximately 8–9 inches (20–23 cm) including the ears. Actual size can vary depending on yarn, hook size, tension, stuffing, and individual technique.

What yarn is used for this crochet bunny?

The design uses medium/worsted-weight #4 yarn, with soft cream as the main color and blush pink as an accent.

What hook size is used?

The pattern is designed around a 3.5 mm crochet hook.

Does the bunny use safety eyes?

Yes. The design uses 10 mm safety eyes. Safety eyes can present a choking hazard and are not appropriate for children under 3.

Is gauge required?

No gauge is required for this design.

How is the bunny constructed?

The head, body, arms, legs, ears, and tail are crocheted as separate pieces. The pieces are then stuffed as appropriate and sewn together.

Can I change the bunny’s colors?

Yes. Changing the main and accent colors is a straightforward way to personalize the finished bunny without changing the basic construction.

More Crochet Inspiration

For more ideas, explore related bunny, animal, and Easter crochet projects on Tiny Yarn Tales.

Final Thoughts

This Easter bunny crochet pattern combines a rounded plush body with long tapered ears, a simple embroidered face, and separate crocheted components that come together through a clear assembly process.

The design follows a simple project flow: prepare your materials, crochet the individual pieces, stuff and shape them, assemble the bunny, and finish the facial and decorative details.

For a different look, experiment with your yarn colors and small facial or ear accents while keeping the core construction the same.