Crochet Lemonade Pattern

This crochet lemonade pattern creates a cheerful drink amigurumi with a tapered cup, a bright lemonade top, a narrow straw, and a small lemon slice garnish. The project is made in separate pieces and finished with a simple assembly sequence.

The finished lemonade is approximately 3.5–4.5 inches tall and 2.5–3.25 inches wide, depending on yarn, hook, tension, stuffing, and individual technique.

Pattern note: This pattern has been mathematically reviewed and constructionally checked, but it has not been physically crocheted and tested yet.

Project Overview

This crochet lemonade is made from four main pieces:

One tapered cup body
One flat lemonade top
One crocheted straw
One small lemon slice

The cup is stuffed before the lemonade top is sewn into place. The straw and lemon slice are then attached to complete the drink.

Project Details

Technique: Crochet amigurumi
Yarn: Category 4 worsted-weight yarn
Hook: 3.5 mm crochet hook
Approximate size: 3.5–4.5 inches tall × 2.5–3.25 inches wide
Filling: Polyester fiberfill
Face: None

Materials & Tools

Yarn

You will need Category 4 worsted-weight yarn in:

Pale aqua for the cup
Lemon yellow for the lemonade
Sunny yellow for the lemon slice
Coral for the straw
A small amount of cream or white for the lemon-segment embroidery

Crochet Hook

3.5 mm crochet hook

Other Supplies

Polyester fiberfill
Yarn needle
Stitch marker
Scissors

Abbreviations

This pattern uses standard US crochet terminology.

Abbreviation	Meaning
MR	Magic ring
sc	Single crochet
inc	Increase — 2 sc in the same stitch
BLO	Back loop only
FO	Fasten off

Before You Start

Work the pieces in continuous rounds unless otherwise noted.

Use a stitch marker to keep track of the beginning of each round.

Check your stitch count at the end of every round. The stitch counts in this pattern help you catch mistakes before they affect later rounds.

Only the cup body is stuffed. The lemonade top and lemon slice remain flat, and the straw is left unstuffed.

Cup Body

Color: Pale aqua
Make: 1

Work in continuous rounds.

Round 1: 6 sc in MR. (6)

Round 2: 6 inc. (12)

Round 3: (sc, inc) × 6. (18)

Round 4: (2 sc, inc) × 6. (24)

Round 5: (3 sc, inc) × 6. (30)

Round 6: 30 sc BLO. (30)

Round 7: 30 sc. (30)

Round 8: 30 sc. (30)

Round 9: 30 sc. (30)

Round 10: 30 sc. (30)

Round 11: 30 sc. (30)

Round 12: 30 sc. (30)

Round 13: 30 sc. (30)

Round 14: 30 sc. (30)

Round 15: 30 sc. (30)

Round 16: (4 sc, inc) × 6. (36)

Round 17: 36 sc. (36)

Round 18: 36 sc. (36)

Round 19: 36 sc. (36)

Round 20: 36 sc. (36)

Round 21: 36 sc. (36)

Round 22: 36 sc. (36)

Fasten off, leaving a long yarn tail for sewing.

Keep the opening accessible for stuffing and assembly.

Lemonade Top

Color: Lemon yellow
Make: 1

Round 1: 6 sc in MR. (6)

Round 2: 6 inc. (12)

Round 3: (sc, inc) × 6. (18)

Round 4: (2 sc, inc) × 6. (24)

Round 5: (3 sc, inc) × 6. (30)

Round 6: (4 sc, inc) × 6. (36)

Round 7: 36 sc. (36)

Fasten off, leaving a long yarn tail for sewing.

Do not stuff this piece.

Straw

Color: Coral
Make: 1

Round 1: 6 sc in MR. (6)

Round 2: 6 sc. (6)

Round 3: 6 sc. (6)

Round 4: 6 sc. (6)

Round 5: 6 sc. (6)

Round 6: 6 sc. (6)

Round 7: 6 sc. (6)

Round 8: 6 sc. (6)

Round 9: 6 sc. (6)

Round 10: 6 sc. (6)

Round 11: 6 sc. (6)

Fasten off, leaving a yarn tail for sewing.

Do not stuff the straw. Gently flatten it between your fingers before attaching it so it keeps a slim appearance.

Lemon Slice

Color: Sunny yellow
Make: 1

Round 1: 6 sc in MR. (6)

Round 2: 6 inc. (12)

Round 3: (sc, inc) × 6. (18)

Round 4: (2 sc, inc) × 6. (24)

Round 5: 24 sc. (24)

Fasten off, leaving a long yarn tail for sewing.

Using a small amount of cream or white yarn, embroider a few short lines radiating from the center to suggest lemon segments.

Assembly

Step 1: Stuff the Cup

Lightly fill the cup body with polyester fiberfill.

Use enough stuffing to support the shape without stretching the stitches. Keep the rim clear so the lemonade top can be attached neatly.

Step 2: Attach the Lemonade Top

Place the yellow lemonade top over the opening of the cup.

The cup opening and lemonade top both have 36 stitches, so their edges are designed to match.

Sew around the complete circumference, keeping the top centered as you work.

Before closing the final section, check that the cup still has an even shape.

Step 3: Attach the Straw

Position the straw toward the back portion of the lemonade surface.

Sew the lower end securely to the yellow top. Add a few extra stitches if needed for stability.

Use visual placement rather than a fixed measurement.

Step 4: Add the Lemon Slice

Position the lemon slice near the front edge of the rim, slightly overlapping the lemonade surface.

Sew the lower edge securely in place.

Check the overall balance of the straw and lemon slice before weaving in the remaining ends.

Finishing

Weave in all remaining yarn tails and trim them neatly.

Gently shape the stuffed cup so the sides remain even and the tapered silhouette is easy to see.

Take a final look at the top, straw, and lemon slice and make any small positioning adjustments before completely hiding the yarn ends.

Helpful Tips

Keep your tension consistent

Even tension helps the cup maintain a smooth shape and keeps the increase rounds even.

Check stitch counts as you work

If your stitch count does not match the number shown at the end of the round, stop and correct the mistake before moving on.

Avoid overstuffing

Too much fiberfill can stretch the crocheted fabric and make the cup look overly rounded.

Check the lemonade top before sewing

Make sure the yellow piece sits evenly over the opening before completing the seam.

Position decorative pieces visually

The straw and lemon slice do not require a strict measurement. Compare their placement from several angles before sewing them permanently.

Troubleshooting

My cup looks too wide or too narrow.

Check your yarn weight, hook size, tension, and increase rounds. A missed or extra increase can change the shape noticeably.

I have the wrong stitch count.

Go back to the previous round and look for a missed increase or an extra stitch. Avoid adding random stitches to compensate on the next round.

The stuffing is showing through.

Remove a small amount of stuffing and reshape the cup. Overfilling can stretch the stitches and make gaps more noticeable.

The lemonade top does not line up with the cup.

Confirm that both the cup opening and the lemonade top have 36 stitches. Center the top before sewing.

The straw looks too thick.

The straw should remain unstuffed. Flatten it gently between your fingers before attaching it.

The lemon slice looks uneven.

Lay the slice flat and adjust its position visually before sewing it to the drink.

Customize Your Crochet Lemonade

Color is an easy way to personalize this project.

Try different combinations for:

The cup
The straw
The lemonade
The lemon slice
The lemon-segment embroidery

You can also make several drinks using different color combinations while keeping the same basic construction.

Changing yarn weight or hook size will affect the finished size and appearance, so treat those changes as design variations rather than assuming the original measurements will remain the same.

Frequently Asked Questions

What yarn is used for this crochet lemonade pattern?

The design uses Category 4 worsted-weight yarn in pale aqua, lemon yellow, sunny yellow, and coral, plus a small amount of cream or white for the lemon detail.

What crochet hook size is used?

Use a 3.5 mm crochet hook.

How big is the finished crochet lemonade?

The approximate target size is 3.5–4.5 inches tall and 2.5–3.25 inches wide. Actual size varies with yarn, tension, hook choice, stuffing, and individual technique.

Does this crochet lemonade have a face?

No. The design is a beverage amigurumi without facial features.

Does the straw need to be stuffed?

No. The straw is worked as a narrow tube and left unstuffed.

How is the lemonade top attached?

Both the cup opening and the lemonade top finish with 36 stitches, allowing the yellow top to be sewn directly to the rim.

Can I change the colors?

Yes. Changing the cup, lemonade, straw, or lemon colors is a natural way to personalize the project.

Has this pattern been physically tested?

Not yet. The pattern has been mathematically reviewed and constructionally checked, but it has not been physically crocheted and tested.

Final Thoughts

This crochet lemonade pattern combines a tapered cup, bright lemonade top, slim straw, and lemon slice into one cheerful amigurumi project.

Because each component is made separately, you can complete the pieces one at a time and then bring them together during assembly.