Crochet Pineapple Amigurumi Pattern

This pineapple amigurumi features a rounded yellow fruit body, raised popcorn-stitch texture, and a leafy green crown made from five crocheted leaves. The body is worked in continuous rounds, while the leaves are made separately and sewn into place.

The finished pineapple is approximately 5–6 inches tall, depending on your yarn, hook, tension, stuffing, and individual technique.

Project Overview

What You’ll Make

This crochet pineapple is made from three main components:

1 yellow pineapple body
5 green leaves
1 green crown base

The fruit body gradually increases to its widest point, stays at 42 stitches through the textured center, and then decreases toward the top. Three rounds of popcorn stitches create the raised pineapple texture.

The finished size is approximate rather than guaranteed. Changing the yarn, hook, tension, or stuffing can change the final dimensions.

Project Details

Detail	Information
Project	Pineapple Amigurumi
Approximate size	5–6 inches tall
Yarn	Medium/worsted-weight yarn (#4)
Hook	4.0 mm
Main color	Yellow
Accent color	Green
Filling	Polyester fiberfill
Main construction	Continuous rounds
Leaves	5 separate pieces
Texture	Popcorn stitch

Materials & Tools

Medium/worsted-weight yarn (#4) in yellow
Medium/worsted-weight yarn (#4) in green
4.0 mm crochet hook
Polyester fiberfill
Tapestry needle
Scissors
Stitch marker

No safety eyes or facial details are used in this design.

Abbreviations

This pattern uses standard US crochet terminology.

MR — magic ring
ch — chain
sc — single crochet
inc — increase; work 2 sc in the same stitch
dec — single crochet decrease
dc — double crochet
pc — popcorn stitch
FO — fasten off

Before You Start

Work in Continuous Rounds

The pineapple body and green crown base are worked in continuous rounds. Use a stitch marker to keep track of the beginning of each round.

The leaves are crocheted flat in rows.

Count Your Stitches

Keep track of the stitch count at the end of every round. This is especially important on the popcorn rounds because each completed popcorn counts as one stitch even though it is made from five double crochets.

Stuff as You Go

Begin stuffing the pineapple body before the opening becomes too small to reach comfortably. Add the fiberfill gradually and avoid overstuffing.

Shape Before Sewing

Before attaching the crown and leaves, make sure the pineapple body has a rounded, balanced shape.

Construction Order

The project is assembled in this order:

Crochet the pineapple body.
Stuff and close the body.
Crochet the green crown base.
Crochet five leaves.
Attach the crown base.
Sew the five leaves to the crown.
Finish and shape the top.

Pineapple Amigurumi Pattern

Pineapple Body

Make 1 in yellow.

Work in continuous rounds.

Round 1

6 sc in MR. (6)

Round 2

6 inc. (12)

Round 3

(sc, inc) × 6. (18)

Round 4

(2 sc, inc) × 6. (24)

Round 5

(3 sc, inc) × 6. (30)

Round 6

(4 sc, inc) × 6. (36)

Round 7

(5 sc, inc) × 6. (42)

Round 8

sc around. (42)

Popcorn Texture

For the popcorn stitch, work 5 dc into the same stitch. Remove the hook from the active loop, insert the hook into the first dc from front to back, pick up the active loop from the last dc, and pull it through the first dc to close the popcorn.

Each completed popcorn counts as 1 stitch.

Round 9

(sc, pc, sc) × 14. (42)

Round 10

sc around. (42)

Round 11

(sc, pc, sc) × 14. (42)

Round 12

sc around. (42)

Round 13

(sc, pc, sc) × 14. (42)

Round 14

sc around. (42)

Shape the Top

Round 15

(5 sc, dec) × 6. (36)

Round 16

sc around. (36)

Round 17

(4 sc, dec) × 6. (30)

Round 18

sc around. (30)

Round 19

(3 sc, dec) × 6. (24)

Round 20

sc around. (24)

Round 21

(2 sc, dec) × 6. (18)

Round 22

sc around. (18)

Begin stuffing the body firmly, but avoid overstuffing.

Round 23

(sc, dec) × 6. (12)

Add more stuffing if needed and check the shape.

Round 24

sc around. (12)

Round 25

6 dec. (6)

Fasten off, leaving a long yarn tail.

Thread the yarn tail through the front loops of the remaining 6 stitches, pull the opening closed, secure the yarn, and weave in the end.

Pineapple Leaves

Make 5 in green.

Each leaf is worked flat in rows.

Row 1

4 sc. (4)

Row 2

inc, 2 sc, inc. (6)

Row 3

inc, 4 sc, inc. (8)

Row 4

8 sc. (8)

Row 5

dec, 4 sc, dec. (6)

Row 6

dec, 2 sc, dec. (4)

Row 7

dec × 2. (2)

Row 8

dec. (1)

Fasten off and leave a long yarn tail for sewing.

Repeat until you have 5 identical leaves.

Green Crown Base

Make 1 in green.

Work in continuous rounds.

Round 1

5 sc in MR. (5)

Round 2

5 inc. (10)

Round 3

sc around. (10)

Fasten off, leaving a long yarn tail for sewing.

Assembly

Step 1: Finish the Pineapple Body

Make sure the pineapple body is securely closed and adequately stuffed.

The finished body should remain rounded without stretching the stitches enough for the stuffing to show through.

Step 2: Attach the Crown Base

Center the green crown base over the closed top of the yellow body.

Sew around the outside edge of the green base to secure it to the upper portion of the pineapple.

Step 3: Attach the Five Leaves

Arrange the five leaves around the green crown base.

Position each leaf so the base sits against the crown and the pointed end extends upward and slightly outward.

Sew the 4-stitch base of each leaf securely to the crown base.

Try to keep the leaves evenly spaced for a balanced crown.

Step 4: Shape the Crown

Once all five leaves are attached, gently bend them upward and outward to create the desired pineapple-crown shape.

Step 5: Finish

Secure and weave in all remaining yarn tails. Trim excess yarn and make any final adjustments to the leaf positions.

Finishing

Take a final look at the pineapple body and crown.

Check that:

The body is evenly stuffed.
No stuffing is visible through the stitches.
The crown base is securely attached.
All five leaves are firmly sewn in place.
The leaves are arranged evenly.
Loose yarn ends are woven in and trimmed.

The pattern has been mathematically reviewed and constructionally checked, but it has not been physically crocheted and tested yet.

Helpful Tips

Keep the Stitch Count Consistent

The body reaches a maximum of 42 stitches. Check your count after each round, especially after increase and decrease rounds.

Use a Stitch Marker

A stitch marker makes continuous rounds easier to track and helps prevent accidentally adding or losing a stitch.

Don’t Overstuff

Add fiberfill gradually. Too much stuffing can stretch the stitches and alter the shape of the pineapple.

Pay Attention to Popcorns

Each popcorn is made from five double crochets but counts as one completed stitch in the round.

Compare the Leaves Before Sewing

Place all five leaves together before attaching them. Since they are designed to be identical, comparing them can help you catch any differences before assembly.

Troubleshooting

My Stitch Count Is Off After a Popcorn Round

Check each (sc, pc, sc) group carefully.

There are 14 groups in each textured round:

14 × 3 = 42 stitches

Remember that each finished popcorn counts as one stitch.

My Pineapple Looks Too Small

Check your tension and verify the stitch counts through the increase rounds. Very tight tension can produce a smaller finished piece.

I Can See the Stuffing

The body may be overstuffed, or the tension may be too loose. Remove a small amount of stuffing and reshape the pineapple before closing it completely.

My Leaves Are Unevenly Spaced

Before sewing them permanently, arrange all five leaves around the crown base and adjust their positions until the spacing looks balanced.

The Body Looks Lumpy

Check the distribution of the fiberfill before the final closure. Small amounts added gradually are easier to shape than a large amount added at once.

Customization Ideas

Change the Yellow Shade

Try different yellow or golden shades for the pineapple body while keeping the crown green.

Adjust the Crown Shape

The five leaves can be positioned more upright for a compact crown or angled farther outward for a wider silhouette.

Experiment With Yarn

Using a different yarn weight can change the finished size and proportions. The approximate 5–6 inch size should not be assumed if the yarn weight is changed.

Frequently Asked Questions

How big is the finished pineapple amigurumi?

The design target is approximately 5–6 inches tall. Final size varies with yarn, hook size, tension, stuffing, and individual technique.

What yarn is used for this pineapple?

The pattern uses medium/worsted-weight yarn (#4) in yellow and green.

What crochet hook size is used?

Use a 4.0 mm crochet hook.

How many leaves does the pineapple have?

The crown is made from 5 separate crocheted leaves.

What creates the pineapple texture?

The raised texture comes from popcorn stitches worked across three rounds of the pineapple body.

Is the pineapple worked in continuous rounds?

Yes. The main pineapple body and green crown base are worked in continuous rounds. The leaves are worked separately in rows.

How is the pineapple stuffed?

The body is gradually stuffed during the final shaping rounds. Add fiberfill before the opening becomes too small to reach comfortably, but avoid overstuffing.

Does this pineapple use safety eyes?

No. This design does not include facial features or safety eyes.

More Crochet Projects

Explore more crochet and amigurumi projects from Tiny Yarn Tales as your next handmade project.

Conclusion

This pineapple amigurumi brings together a rounded fruit body, raised popcorn-stitch texture, and a five-leaf green crown.

Keep your stitch counts consistent, add the stuffing gradually, and take your time positioning the leaves during assembly. Those details will help you create a balanced finished pineapple.

Happy crocheting!